
Edenta
Volcano milling cutter grind 24 spiral serration, violet fine, HP, figure 194, 13.5 mm, ISO 040
Odonto varenr. 168806 · Produsentens varenr. DLC-6924.040HP
197,00 kr inkl. mva
På lager (4)
Nøkkelinfo
- Pakning1 stk.
- ISO40
- Diameter4 mm
- Hodelengde13.5 mm
- SkafttypeHP
- Fargelilla
Beskrivelse
Volcano - carbide milling cutter with DLC coating for increased performance, combined with high cutting performance and maximum tool life. The DLC wear protection achieves a high cutter hardness and a smooth, pore-free cutter surface. This increases cutter hardness and reduces frictional resistance. The wear resistance is increased and premature chipping of the cutter cutting edges is prevented, thus considerably extending the service life of the cutters.
Grinding 24 = For a particularly fine grinding pattern on all alloys. Especially for titanium, as the special grinding prevents the milling cutter from clogging.
Speed recommendations - laboratory milling cutters.
- 010 - 023 = 5,000 - 40,000 rpm.
- 025 - 045 = 15,000 - 30,000 rpm.
- 050 - 080 = 15,000 - 20,000 rpm.
- Model casting technique, model fabrication, plastics technique, crown/bridge technique
Failure to observe the maximum permissible speed leads to an increased safety risk.
Produktegenskaper
- Produsent
- Edenta
- Produsentens varenummer
- DLC-6924.040HP
- Odonto varenummer
- 168806
- Enhetsbeskrivelse
- Milling cutter
- Kort beskrivelse
- spiral serration, violet fine, HP, figure 194, 13.5 mm, ISO 040
- Farge
- lilla
- Form
- 194, Konus
- ISO
- 40
- Diameter
- 4 mm
- Hodelengde
- 13.5 mm
- Steril
- Nei
- Interdigitasjon
- Spiralfortanning
- Forpakning 2
- Stykk
- Bruksområde
- for model production | for plastic | for crowns | for bridges | for all alloys | for titanium (Ti) | for model casting
- Skafttype
- HP
- Biocidprodukt
- Nei
- Medisinsk utstyr
- Nei
- Kosmetisk produkt
- Nei
Relaterte produkter
-
OMNIDENT
Omni carbide milling cutter grind 10 piece cross serrated, blue standard, HP, figure 001, 1.2 mm, ISO 014
93,60 kr inkl. mvaV. nr: 155804
På lager
(8)
-
Hager & Meisinger
Burr HM 515 Pack of 2, HP, Figure 467, 11 mm, ISO 023
273,80 kr inkl. mvaV. nr: 152409
På lager
(4)
-
OMNIDENT
Omni carbide milling cutter, ground 51 piece cross serrated, 3 x black medium coarse, HP, figure 263, 12 mm, ISO 060
186,30 kr inkl. mvaV. nr: 152351
På lager
(7)
-
OMNIDENT
Omni carbide milling cutter, ground 51 piece cross serrated, 3 x black medium coarse, HP, figure 274, 14 mm, ISO 060
186,30 kr inkl. mvaV. nr: 152352
På lager
(6)
