Edenta

CeraGloss piece yellow superfine, HP, figure 292, 16 mm, ISO 050

Odonto varenr. 165647 Produsentens varenr. 30041HP

227,50 kr inkl. mva

På lager (1)

Nøkkelinfo

  • Pakning1 stk.
  • ISO50
  • Diameter5 mm
  • Hodelengde16 mm
  • SkafttypeHP
  • Fargegul

Beskrivelse

3-step diamond polishing system for processing all ceramic materials without generating heat. Brilliant polishing results without polishing paste, achieved by a special bonding concept in coordination with the diamond grit.

  • 1st stage: Green - Coarse grit for pre-grinding, for fast and coarse material removal. 341 - 344 = 20,000 rpm, 301-310 = 5,000 rpm.
  • 2nd stage: Blue - Medium-coarse grit for surface smoothing and preparation for final polishing. 3041 - 3044 = 20,000 rpm, 3001-310 = 5,000 rpm.
  • 3rd stage: Yellow - Superfine grit for high-gloss polishing without additional glaze firing. 30041 - 30044 = 10,000 rpm, 30001-30010 = 5,000 rpm.
  • Veneering and ceramic technique, crown/bridge technique, occlusal processing ceramic

Application notes: Always work with light contact pressure. For optimum polishing results, all 3 steps must be followed in the order stated.

Produktegenskaper

Produsent
Edenta
Produsentens varenummer
30041HP
Odonto varenummer
165647
Enhetsbeskrivelse
Polisher
Kort beskrivelse
piece yellow superfine, HP, figure 292, 16 mm, ISO 050
Farge
gul
Form
292, Torpedo
ISO
50
Diameter
5 mm
Hodelengde
16 mm
Steril
Nei
Forpakning 2
Stykk
Bruksområde
for zirconium | for crowns | for veneering | for high gloss polishing | for ceramics | for bridges | for occlusal processing | for smoothing | for pre-grinding
Skafttype
HP
Korning
superfin
Biocidprodukt
Nei
Medisinsk utstyr
Nei
Kosmetisk produkt
Nei
Forventet på lager
02.12.2026

Legg til i favorittliste

Logg inn for å lagre produkter i favorittlister.

Logg inn