Edenta

CeraGloss piece green coarse, HP, figure 292, 16 mm, ISO 050

Odonto varenr. 165650 Produsentens varenr. 341HP

227,50 kr inkl. mva

På lager (4)

Nøkkelinfo

  • Pakning1 stk.
  • ISO50
  • Diameter5 mm
  • Hodelengde16 mm
  • SkafttypeHP
  • Fargegrønn

Beskrivelse

3-step diamond polishing system for processing all ceramic materials without generating heat. Brilliant polishing results without polishing paste, achieved by a special bonding concept in coordination with the diamond grit.

  • 1st stage: Green - Coarse grit for pre-grinding, for fast and coarse material removal. 341 - 344 = 20,000 rpm, 301-310 = 5,000 rpm.
  • 2nd stage: Blue - Medium-coarse grit for surface smoothing and preparation for final polishing. 3041 - 3044 = 20,000 rpm, 3001-310 = 5,000 rpm.
  • 3rd stage: Yellow - Superfine grit for high-gloss polishing without additional glaze firing. 30041 - 30044 = 10,000 rpm, 30001-30010 = 5,000 rpm.
  • Veneering and ceramic technique, crown/bridge technique, occlusal processing ceramic

Application notes: Always work with light contact pressure. For optimum polishing results, all 3 steps must be followed in the order stated.

Produktegenskaper

Produsent
Edenta
Produsentens varenummer
341HP
Odonto varenummer
165650
Enhetsbeskrivelse
Polisher
Kort beskrivelse
piece green coarse, HP, figure 292, 16 mm, ISO 050
Farge
grønn
Form
292, Torpedo
ISO
50
Diameter
5 mm
Hodelengde
16 mm
Steril
Nei
Forpakning 2
Stykk
Bruksområde
for zirconium | for crowns | for veneering | for high gloss polishing | for ceramics | for bridges | for occlusal processing | for smoothing | for pre-grinding
Skafttype
HP
Korning
grov
Biocidprodukt
Nei
Medisinsk utstyr
Nei
Kosmetisk produkt
Nei

Legg til i favorittliste

Logg inn for å lagre produkter i favorittlister.

Logg inn