
Edenta
Carbide milling cutter grind 86 pcs. safety serrations, wine red phase cut, HP, figure 274, 14 mm, ISO 060
Odonto varenr. 163413 · Produsentens varenr. 5486.060HP
171,50 kr inkl. mva
På lager (6)
Nøkkelinfo
- Pakning1 stk.
- ISO60
- Diameter6 mm
- Hodelengde14 mm
- SkafttypeHP
- Fargerød
Beskrivelse
For processing plaster models. The phase grinding guarantees high material removal and a smooth material surface. The counter-clockwise toothing ensures reliable processing as the cutter shank does not pull out of the collet even when removing large amounts of material. The large chip spaces ensure optimum chip transport and prevent clogging of the milling cutter. The phase grinding gives the milling cutter particularly smooth running, is easy to guide and does not catch.
Speed recommendations - laboratory milling cutters.
- 010 - 023 = 5,000 - 40,000 rpm.
- 025 - 045 = 15,000 - 30,000 rpm.
- 050 - 080 = 15,000 - 20,000 rpm.
- Model production
Failure to observe the maximum permissible speed leads to an increased safety risk. For milling cutters with grinding codes 40 - 85, grinding movements must be carried out under constant pressure and in compliance with the specified speeds.
Produktegenskaper
- Produsent
- Edenta
- Produsentens varenummer
- 5486.060HP
- Odonto varenummer
- 163413
- Enhetsbeskrivelse
- Milling cutter
- Kort beskrivelse
- pcs. safety serrations, wine red phase cut, HP, figure 274, 14 mm, ISO 060
- Farge
- rød
- Form
- 274, Granat
- ISO
- 60
- Diameter
- 6 mm
- Hodelengde
- 14 mm
- Steril
- Nei
- Interdigitasjon
- Sikkerhetsfortanning
- Forpakning 2
- Stykk
- Bruksområde
- for plastic | for plaster
- Skafttype
- HP
- Biocidprodukt
- Nei
- Medisinsk utstyr
- Nei
- Kosmetisk produkt
- Nei
Relaterte produkter
-
Hager & Meisinger
Carbide milling cutter SX Pack of 2 cross serrated, black super coarse, HP, figure 274, 14.4 mm, ISO 060
588,60 kr inkl. mvaV. nr: 151507
På lager
(1)
-
OMNIDENT
Omni carbide milling cutter grind 55 piece cross serrated, black super coarse, HP, figure 274, 14 mm, ISO 060
171,30 kr inkl. mvaV. nr: 152707
På lager
(32)
-
Hager & Meisinger
Carbide milling cutter FX Pack of 2 cross serrated, red fine, HP, figure 198, 8 mm, ISO 023
339,40 kr inkl. mvaV. nr: 153000
På lager
(1)
-
OMNIDENT
Omni carbide milling cutter, ground 51 piece cross serrated, 3 x black medium coarse, HP, figure 274, 14 mm, ISO 060
186,30 kr inkl. mvaV. nr: 152352
På lager
(6)
