
Horico
Carbide milling cutter 194 piece black coated, cross serration, red fine, HP, figure S194, 13 mm, ISO 040
Odonto varenr. 169791 · Produsentens varenr. S194140040
197,10 kr inkl. mva
På lager (18)
Nøkkelinfo
- Pakning1 stk.
- ISO40
- Diameter4 mm
- Hodelengde13 mm
- SkafttypeHP
- Fargerød
Beskrivelse
Figure 194 = Carbide milling cutter...
Figure S194 = Carbide milling cutter, black coated. Black is hardness 3,300 HV. Black is particularly smooth: longer service life of the cutting edges due to improved chip removal.
Figure T194 = Titanium nitride coated carbide end mills.
- 110 = Metal alloys, precious metals, veneering ceramics
- 132 - 136 = denture acrylics, soft acrylics, metal alloys, titanium, veneering ceramics
- 137 = Denture acrylics, soft acrylics, metal alloys, titanium
- 138 = Metal alloys
- 140 = Denture acrylics, metal alloys, precious metals, veneering ceramics
- 175 = Plaster, denture acrylics
- 190 = Plaster, denture acrylics, metal alloys
- 212 = Denture acrylics, soft acrylics
- 220 = Plaster, denture acrylics
- 223 - 225 = Plaster, denture base resins
- KX = Plastics, PMMA
- Max. Speeds ISO 003 - 027, 031, 040, 045: 50,000 rpm.
- Max. Speed ISO 050: 40,000 rpm.
- Max. Max. speed ISO 060: 35,000 rpm.
- Max. Speed ISO 070: 30,000 rpm.
Produktegenskaper
- Produsent
- Horico
- Produsentens varenummer
- S194140040
- Odonto varenummer
- 169791
- Enhetsbeskrivelse
- Milling cutter
- Kort beskrivelse
- piece black coated, cross serration, red fine, HP, figure S194, 13 mm, ISO 040
- Farge
- rød
- Form
- 194, Kjegle, Rund
- ISO
- 40
- Diameter
- 4 mm
- Hodelengde
- 13 mm
- Steril
- Nei
- Interdigitasjon
- Kryssfortanning
- Forpakning 2
- Stykk
- Bruksområde
- for plastic | for non-precious metal (NEM) | for veneering | for precious metal (EM) | for ceramics
- Skafttype
- HP
- Korning
- fin
- Biocidprodukt
- Nei
- Medisinsk utstyr
- Nei
- Kosmetisk produkt
- Nei
Relaterte produkter
-
Hager & Meisinger
Burr HM 515 Pack of 2, HP, Figure 467, 11 mm, ISO 023
273,80 kr inkl. mvaV. nr: 152409
På lager
(4)
-
Hager & Meisinger
Carbide milling cutter GM Pack of 2 special cross serrated, blue standard, HP, Figure 274, 14.7 mm, ISO 060
588,60 kr inkl. mvaV. nr: 157849
På lager
(2)
-
OMNIDENT
Omni carbide milling cutter grind 55 piece cross serrated, black super coarse, HP, figure 274, 14 mm, ISO 060
171,30 kr inkl. mvaV. nr: 152707
På lager
(32)
-
Hager & Meisinger
Carbide milling cutter FX Pack of 2 cross serrated, red fine, HP, figure 187, 15 mm, ISO 023
470,90 kr inkl. mvaKjøpV. nr: 153004
Midlertidig utsolgt
Est. lager: 25.11
