
Horico
Carbide milling cutter 194 Cross serration, blue normal, HP, Figure 194, 13 mm, ISO 045
Odonto varenr. 169773 · Produsentens varenr. 194190 045
165,80 kr inkl. mva
Midlertidig utsolgt Est. lager: 19.11
Nøkkelinfo
- Pakning1 stk.
- ISO45
- Diameter4.5 mm
- Hodelengde13 mm
- SkafttypeHP
- Strukturuten belegg
Beskrivelse
Figure 194 = Carbide milling cutter...
Figure S194 = Carbide milling cutter, black coated. Black is hardness 3,300 HV. Black is particularly smooth: longer service life of the cutting edges due to improved chip removal.
Figure T194 = Titanium nitride coated carbide end mills.
- 110 = Metal alloys, precious metals, veneering ceramics
- 132 - 136 = denture acrylics, soft acrylics, metal alloys, titanium, veneering ceramics
- 137 = Denture acrylics, soft acrylics, metal alloys, titanium
- 138 = Metal alloys
- 140 = Denture acrylics, metal alloys, precious metals, veneering ceramics
- 175 = Plaster, denture acrylics
- 190 = Plaster, denture acrylics, metal alloys
- 212 = Denture acrylics, soft acrylics
- 220 = Plaster, denture acrylics
- 223 - 225 = Plaster, denture base resins
- KX = Plastics, PMMA
- Max. Speeds ISO 003 - 027, 031, 040, 045: 50,000 rpm.
- Max. Speed ISO 050: 40,000 rpm.
- Max. Max. speed ISO 060: 35,000 rpm.
- Max. Speed ISO 070: 30,000 rpm.
Produktegenskaper
- Produsent
- Horico
- Produsentens varenummer
- 194190 045
- Odonto varenummer
- 169773
- Enhetsbeskrivelse
- Milling cutter
- Kort beskrivelse
- Cross serration, blue normal, HP, Figure 194, 13 mm, ISO 045
- Farge
- blå
- Form
- 194, Kjegle, Rund
- ISO
- 45
- Diameter
- 4.5 mm
- Hodelengde
- 13 mm
- Steril
- Nei
- Interdigitasjon
- Kryssfortanning
- Struktur
- uten belegg
- Forpakning 2
- Stykk
- Bruksområde
- for plastic | for plaster | for non-precious metal (NEM)
- Skafttype
- HP
- Korning
- standard
- Biocidprodukt
- Nei
- Medisinsk utstyr
- Nei
- Kosmetisk produkt
- Nei
- Forventet på lager
- 19.11.2026
Relaterte produkter
-
Hager & Meisinger
Carbide milling cutter SX Pack of 2 cross serrated, black super coarse, HP, figure 274, 14.4 mm, ISO 060
588,60 kr inkl. mvaV. nr: 151507
På lager
(1)
-
SCHEU-DENTAL
Finishing cutter Pack of 6 pieces red, square
809,50 kr inkl. mvaV. nr: 152678
På lager
(4)
-
Horico
Carbide cutter 225 Blister 5 pieces cross serration, red fine, HP, figure 225, 6 mm, ISO 023
524,40 kr inkl. mvaV. nr: 150864
På lager
(2)
-
Hager & Meisinger
Carbide milling cutter FX Pack of 2 cross serrated, red fine, HP, figure 199, 11 mm, ISO 023
375,00 kr inkl. mvaV. nr: 152999
På lager
(2)
